Request a quoteInquire

Cutting room

Automated fabric cutting service

ADONIS cuts fabric to order on an automated Gerber system for sewing units, ateliers and brands. You supply the fabric and patterns, or our pattern makers prepare them, and you receive accurate cut pieces ready to sew.

  • 38+years in business
  • 42-78size range
  • Gerberautomated cutting
Automated fabric cutting service

ADONIS is an outerwear manufacturer in Kharkiv, Ukraine, in business since 1988, with its own cutting room. Our automated fabric cutting service runs on the same Gerber equipment we use to cut the jackets and raincoats of our own collections. It suits manufacturers that have no automated cutting or run short of cutting capacity in peak season.

Before cutting, the technologist inspects the material and checks the patterns and marker. If you have no patterns, or need them graded into other sizes, ADONIS pattern makers prepare them. After cutting, pieces are bundled by size and handed to you, or passed straight to sewing at our factory if you order full production.

01

Cutting process in the garment industry: manual vs automated

In the cutting process of the garment industry, fabric is spread in plies on a table and cut into panels following a marker, the layout of all pattern pieces. In manual cutting an operator follows chalk lines, and accuracy depends on skill and on the height of the lay. In automated cutting the system holds the spread and the cutting head follows the digital marker, so every ply and every repeat is cut the same way. For outerwear, with many pieces and costly fabrics and insulation, that shows in consistent fit and in material use.

02

What is a Gerber cutter?

A Gerber cutter is an automated cutting system for textiles that cuts panels from a digital marker on a dedicated cutting table. Many searches for a Gerber cutting machine or Gerber cutting table come from people buying equipment; this page is about cutting as a service, done at ADONIS on our own Gerber system. To get started, send us the following. The file formats our system accepts for patterns and markers are confirmed by the technologist before work starts.

  • fabric with composition and roll width
  • patterns or marker as files
  • quantities by size and colour
  • requirements for nap, print direction or matching
  • the date you need the cut pieces
03

Benefits of automated fabric cutting for your production

The main benefits of automated fabric cutting are accuracy, repeatability and better use of fabric. Pieces from the top and the bottom of the lay are the same, which makes sewing faster and fit more consistent across a run. A digital marker can be planned to use fabric efficiently before a single cut is made. Makers usually come to us when cutting becomes the bottleneck: in season, volumes grow and manual cutting cannot keep up with the sewing line. You can order cutting alone, or combine it with quilting or logo embroidery on the panels before sewing, so the pieces pass every step in one place.

04

How our automated fabric cutting service works

Cutting to order at ADONIS follows the same steps as cutting for our own collections. The sequence avoids surprises: questions about material and patterns are settled before the first cut, not after it. You know in advance what you will receive and when, so you can plan your sewing line around the hand-over date.

  • material inspection and pattern check
  • marker planning or correction
  • spreading the fabric in plies
  • automated cutting on the Gerber system
  • bundling pieces by size
  • hand-over to you or to the next operation
05

Laser cutting or automated Gerber cutting?

Laser fabric cutting and automated Gerber cutting are often searched together, but they are different technologies. A laser burns through the material and can seal the edge of synthetics, so it is chosen for specific tasks. ADONIS works with an automated Gerber system of the kind used for production cutting of garments. If a laser-sealed edge matters for your product, say so in your request and the manager will tell you honestly whether our process suits it.

FAQ

What wholesale buyers ask

What is a Gerber cutter used for?

A Gerber cutter is used to cut garment panels automatically from a digital marker, usually through several plies of fabric at once. It replaces cutting by hand along chalk lines, giving identical pieces across the lay. ADONIS uses its Gerber system for its own collections and as a cutting service for other makers.

What are the benefits of automated fabric cutting?

Automated cutting gives accurate, repeatable pieces and efficient use of fabric. Every ply is cut the same, so fit stays consistent from the first garment to the last, and sewing goes more smoothly. The marker is planned digitally, which helps to reduce fabric waste.

Can I order cutting only?

Yes. Gerber cutting can be ordered on its own. You receive bundled pieces sorted by size and sew them in your own production. If you need it, pattern making, quilting or embroidery can be added to the cutting order.

What is the minimum quantity for cutting?

The minimum depends on the fabric, the number of pieces in the style, the sizes and the colours. For automated cutting, what matters is how many plies can be spread and how often the marker repeats. The manager agrees volume and terms once we have seen the material and patterns.

Which fabrics can you cut?

ADONIS routinely cuts outerwear fabrics: raincoat and jacket shells, linings and similar materials. Whether a specific material suits our process, for example a coated fabric, insulation or a pile fabric, is confirmed by the technologist after inspecting a swatch.

Quote request

Order fabric cutting

Describe the fabric, send your patterns and quantities by size, and our manager will prepare a cutting quote.

+38 099 222 55 29

What do you need made?

Describe the style, quantity and timing in your own words. Our wholesale sales manager will cost the order and send you a quote.

Wholesale clients only. We reply during business hours.