Request a quoteInquire

Our own workshop

Outerwear factory in Kharkiv: how ADONIS makes jackets

The ADONIS outerwear factory in Kharkiv covers every operation in making outerwear: patterns and automated cutting, quilting, embroidery, sewing and quality control. Nothing is subcontracted, so we are responsible for every order.

  • 38+years in business
  • 42-78size range
  • Gerberautomated cutting
Outerwear factory in Kharkiv: how ADONIS makes jackets

The ADONIS outerwear factory is located in Kharkiv, Ukraine, and runs as a full-cycle garment factory. The company was founded in 1988, women's outerwear has been its specialisation since 2002, and today the team counts more than 50 specialists. In our own workshop we construct and grade patterns in sizes 42-78, cut fabric on a Gerber system, quilt, embroider, sew and check every garment.

The six production areas and the order workflow are shown visually below. This page adds what buyers usually ask before a first order: what equipment the workshop runs, how quality control is organised, what determines capacity and which operations you can order separately if you already have your own sewing production.

01

What a full-cycle outerwear factory means

Full cycle means a style passes through every stage in one workshop, from the first pattern to the packed order. For outerwear this matters more than for most garments: a jacket or puffer combines shell fabric, insulation, lining and trims, and quilting and embroidery are often done before sewing. When cutting, quilting and sewing happen in different places, parts have to travel between subcontractors and every hand-off needs coordinating. At ADONIS these operations follow one another in the same facility, so the schedule is easier to control and responsibility for the result stays with one party.

02

What equipment does the factory use?

The ADONIS workshop is built around an automated Gerber cutting system, equipment for decorative and technical quilting, embroidery equipment and industrial sewing machines. Gerber cutting keeps parts equally precise across every size in an order and supports efficient lay plans that reduce fabric waste. The quilting equipment handles both technical quilting for insulated garments and decorative patterns, including ones designed for your brand. Embroidery is used for logos, names and brand details. Patterns are constructed and graded by the factory's own specialists.

  • Automated Gerber cutting system
  • Decorative and technical quilting equipment
  • Embroidery equipment
  • Industrial sewing machines
  • In-house pattern construction and grading
03

Jacket manufacturing process: where quality starts

Much of a jacket's quality is decided before the parts reach the sewing line. In the cutting room, fabric is spread and cut on the Gerber system to patterns built and graded for the whole size range. Precise parts match better during sewing, so seams lie flat and the fit holds across all sizes from 42 to 78. In the quilting area, the shell is joined with insulation or stitched with a decorative pattern, and even stitching affects both the look and the warmth of the garment. Both operations run in our own workshop, so they can be checked at any stage.

04

How is quality controlled?

Quality control at ADONIS works in stages: every garment is checked on its way from cutting to the finished piece, not only at the end. Before the run starts, you approve a sample, and that sample becomes the reference for every check. Cut parts, quilting evenness, seams and trims are then inspected, and at the final stage the finished garment, labelling and packing. When a deviation is caught early, it is corrected before it can repeat across the whole order. This approach keeps results consistent from one order to the next, which is why wholesale buyers return to us season after season.

  • Approved sample as the reference
  • Cut part inspection
  • Quilting and seam checks
  • Trim inspection
  • Final inspection, labelling and packing
05

Workshop services for other garment producers

The workshop's equipment is not reserved for our own collections. Garment producers, ateliers and brands order separate operations from ADONIS: automated Gerber cutting, decorative and technical quilting, including development of a custom quilting pattern, and embroidery of logos and decoration. This is useful when you have your own sewing line but no automated cutting or quilting equipment. Terms for each operation depend on volume and material, so the manager calculates them in a quote. Each service has its own page in the workshop services section.

Production

The full cycle under one roof

From the first pattern to the finished order, every operation happens in our own workshop in Kharkiv. We do not outsource any of it, so we answer for the quality, lead time and cost of every order.

  • Six stages in one workshop
  • No outsourced operations
  • Sizes 42 to 78
Patterns and grading

Stage 01 / 06

Patterns and grading

We draft patterns and grade them across an extended size range, from 42 to 78, so a style fits just as well in every size.

Sizes 42 to 78

Patterns and grading

Stage 01 / 06

Patterns and grading

We draft patterns and grade them across an extended size range, from 42 to 78, so a style fits just as well in every size.

Sizes 42 to 78

Gerber cutting

Stage 02 / 06

Gerber cutting

Industrial automated cutting on a Gerber system: precise parts, speed and less fabric waste, which means a lower unit cost for you.

Automated cutting

Fabric quilting

Stage 03 / 06

Fabric quilting

Decorative and technical quilting on our own equipment. We develop patterns and textures, including ones for your brand.

Our own patterns

Embroidery

Stage 04 / 06

Embroidery

Embroidery that brings out your brand's character: logos, names, signature details and decorative elements.

Logos and decoration

Sewing

Stage 05 / 06

Sewing

Experienced craftspeople and modern equipment. Attention to detail at every step, from fabric to trims and finishing.

From fabric to trims

Quality control

Stage 06 / 06

Quality control

Every garment is checked step by step, from cutting to the finished piece. Consistent results from order to order.

Checked at every stage

How we work

From inquiry to shipment

A transparent process: at every stage you know what is happening with your order and who is responsible for it.

  1. Pencil drawing: a designer's desk with a quilted jacket sketch, a tech pack and fabric swatches
    01

    Inquiry and brief

    Send a style, tech pack, photos or an idea. Your manager confirms volume, fabrics, sizes and target dates.

    Reply during business hours
  2. Pencil drawing: a clipboard with a costing table, a calculator and fabric swatches
    02

    Quote

    We prepare a quote with unit price, order terms and a production schedule.

    Quote
  3. Pencil drawing: graded pattern pieces, a ruler and a French curve
    03

    Patterns and grading

    Our pattern makers build patterns and grade them across the size range you need, up to size 78.

    42-78
  4. Pencil drawing: a quilted jacket on a dress form with pins
    04

    Sample

    We sew a sample and approve it with you: fit, materials, trims and branding.

    Sample approval
  5. Pencil drawing: an automated fabric cutting system
    05

    Gerber cutting

    Automated cutting on a Gerber system: maximum precision, speed and fabric savings.

    Automated
  6. Pencil drawing: an industrial sewing machine and quilted fabric
    06

    Sewing, quilting, embroidery

    We sew the run in our own workshop. Quilting and embroidery are done in-house, with no subcontractors.

    In-house
  7. Pencil drawing: a rail of finished garments and shipping boxes
    07

    Quality control and shipping

    Step-by-step inspection of every garment, labelling, packing and dispatch to you or to a marketplace warehouse.

    Shipping

FAQ

What wholesale buyers ask

What equipment does the ADONIS factory use?

The ADONIS factory runs an automated Gerber cutting system, decorative and technical quilting equipment, embroidery equipment and industrial sewing machines. Patterns are constructed and graded by the factory's own specialists. As a result, every key operation in making outerwear is done in one workshop in Kharkiv.

What is the monthly capacity?

Capacity depends on the style, its complexity and the seasonal workload of the workshop, so we do not quote a single figure for every order. A simple windbreaker and an insulated jacket with quilting and embroidery take very different amounts of time. The manager estimates the possible volume and schedule for your order and states them in the quote.

How is quality controlled?

Quality is controlled in stages, from cutting to the finished garment. The reference is the sample you approve before the run. Cut parts, quilting, seams and trims are checked, and at the end the finished garment, labelling and packing. This way deviations are caught early and do not repeat across the order.

What is the jacket manufacturing process?

At ADONIS a jacket goes from pattern to dispatch in one workshop. Patterns are constructed and graded, a sample is made and approved, fabric is cut on the Gerber system, quilting and embroidery are done, the order is sewn, and every garment is inspected and packed. The production section above shows each of these stages.

What is the down jacket manufacturing process?

A puffer or down-style jacket follows the same path, with one extra step: in the quilting area the shell fabric is joined with the insulation, stitched into channels or panels that hold the fill in place. Even stitching here decides how evenly the warmth is spread. The type of insulation for your style is agreed with the manager when the quote is prepared.

Can I order only cutting, quilting or embroidery?

Yes, automated Gerber cutting, decorative and technical quilting and embroidery are available as separate workshop services. Garment producers, ateliers and brands order them. Send a description of the material, the volume and the result you need, and the manager will prepare a calculation in a quote.

Quote request

Show us your style

Send a tech pack, sketch or photo. The manager will assess how the style runs through our workshop and prepare a quote.

+38 099 222 55 29

What do you need made?

Describe the style, quantity and timing in your own words. Our wholesale sales manager will cost the order and send you a quote.

Wholesale clients only. We reply during business hours.